![]() |
Boot up System Settings
Switch on and hold | and Press | ||
1 | : | System Upgrade Mode. Connect USB-PC |
|
2 | : | Backup/Restore Mode Connect USB-PC |
|
CLEAR | Start/Stop | : | Factory Reset (Display: rSt) |
14 + 16 | Start/Stop | : | Show OS Version 104 means v1.04 |
PTN SELECT | Turn TEMPO | : | MIDI Tx/Rx Channel OFF, C1-C16 OMNI (Rx=All, Tx=C10) |
1 | : | MIDI Clock Source On: Auto (USB/MIDI in) Off: Internal |
|
2 | : | MIDI Thru On: Out Port=Thru Off: Out Port=Out |
|
3 | : | Boost Level Mix Out Jacks On (default) Off |
|
4 | : | External In Jacks Mode On: Stereo Off: Mono x2 |
|
5 | : | Scatter [ON] Button Mode (v1.10) On: Momentary Off: Latch (default) |
|
6 | : | Ingnore MTC (Play/Stop) data (v1.10) On: Ignore Off: Receive |
|
7 | : | Pattern Sequencer operation mode (v1.12) On: exact Digital Timing Off: Tr-808 Analog Timing Mode (default) |
|
8 | : | 808/606 Cymbal Parameter operating mode (v1.20) On: Lock CH/OH Tune & Fader to CH Off: CH/OH Volume/tuning default buttons (default) |
|
Variation A | : | Assign Out A 1..16: Select Instrument |
|
Variation B | : | Assign Out B 1..16: Select Instrument |
|
Hold TAP | : | Screen Saver Time Out TurnTempo to change |
|
TR-REC | : | Programming Mode On: Pad toggles Strong>Weak>Off Off: enter weak note with Ins+Pad |
|
KIT | : | Effect Mode On: Effect Type is saved in the Kit Off: All Kits use the same Effect Type |
|
Start/Stop | : | Save the settings | |
: | Change the Color Scheme Hold DEPTH (Scatter) and turn Scatter Wheel 1: Original 808 (Red-orange-yellow-white) 2: Original 808 (dimmed) 3: Blue-purple-pink-orange 4: All green 5: White-red-green-white 6: Pink-putple-oranger-white |
When done, press START / STOP to save the changes. The TR-8 will reboot into performance mode including your new settings.